Content
- Why is Utility-Scale Renewable Generation Important?
- ANNUAL RENEWABLE POWER CAPACITY ADDITIONS SET A NEW RECORD IN
- In 2026, all net new generating capacity = renewables
- Overcoming challenges and opportunities
- Sodium-ion batteries: A technology brief
- IRENA ( , Renewable power generation costs in 2022, International Renewable Energy Agency, Abu Dhabi.
- Hydroelectric Power Generation
Compared to other forms of power generation, solar offers relatively low operational expenditure (OPEX) with limited moving parts and fuel costs. Major upfront costs for a utility-scale solar farm include land acquisition, solar infrastructure, installation and construction, and grid connection. By virtue of their scale, utility-sized solar projects are typically subject to far more extensive permitting requirements than other commercial or residential systems. As they are unconstrained by complex building structures, these sites can be engineered for optimal sun exposure and scalable expansion. Their objective is to deliver a clean, reliable, and high-volume alternative to fossil fuels – deployable across sizeable districts or regions.
FERC has released a notice of inquiry seeking comments on potential enhancements to NERC’s Critical Infrastructure Protection (CIP) Reliability Standards. The Report identifies areas of ongoing concern including generation reserve margins and the reliability risk from shifting the resource mix toward renewables. TRC Digital will facilitate Dominion Energy’s strategy development and technology execution, allowing Dominion Energy and its customers to accelerate the shift to distributed energy resources (DER) and net carbon reduction. In its 2020 Report on CIP Reliability Audits, the Federal Energy Regulatory Commission found that most of the cybersecurity protection processes and procedures adopted by utilities met the mandatory CIP requirements for protecting the Bulk Electric System. Recently, FERC made public it’s intent to address serious allegations of facility ratings violations, including a lack of rigor by one utility.
There were almost 1,700 physical security incidents reported to the Electricity-Information Security Analysis Center (E-ISAC) in 2022, an increase of 10.5% from 2021. Discover how the power grid can accommodate growing transportation electrification trends. As technology advances and cybersecurity threats loom, companies must prioritize communications retrofits and upgrades to ensure reliability, availability and business continuity. How TRC’s Smart Grid Solutions Can Help Utilities Successfully Meet the Complex Challenges of the Energy Transition
Why is Utility-Scale Renewable Generation Important?
Today, TRC announced the expansion of its digital capabilities with the acquisition of Quatric, a Montreal, QC and Quincy, MA-based firm that provides engineering services and technology solutions to electric and gas utilities. In today’s dynamic power delivery world, utilities are increasingly focused on electrical distribution systems and reliability. As part of its grid enhancement program, OG&E will leverage collaborative AI-powered image recognition technology that enables engineers to complete distribution pole inspections with greater accuracy and helps to reduce manual review of images. ERCOT’s recently released “Roadmap to Improving Grid Reliability” presents a plan for change in Texas that includes increasing electric power generation and purchasing significantly more power reserves.
ANNUAL RENEWABLE POWER CAPACITY ADDITIONS SET A NEW RECORD IN
Building utility-scale renewable energy infrastructure such as wind or solar requires a vast amount of space. For developers, investors, and EPCs, such numbers underscore the fact that solar (and in particular, large-scale solar) is not just a niche growth segment, but a major industrial-scale shift in the power sector. Next-generation tandem cells that combine multiple cell layers are expected to deliver efficiencies of 33% and up, setting unprecedented new standards. Engineering, Procurement, and Construction (EPC) contractors are then responsible for designing and building the utility-scale solar power plant in accordance with the specified schedule, budget, and performance requirements. Typically signed once project feasibility has been established but before major construction begins, in order to support project finance closing. An efficient monitoring plan can help keep costs down by preventative maintenance and rapid issue resolution before they become major problems down the line.
- On the other hand, dedicated energy crops require more investment in land use, harvesting, logistics and storage, thus affecting the economics of biomass power generation.
- Mature technologies include direct combustion in stoker boilers, low-percentage co-firing, anaerobic digestion, municipal solid waste incineration, landfill gas and combined heat and power (CHP).
- The latter category includes atmospheric biomass gasification and pyrolysis – technologies that are still in the developmental stage, but are now being tested on a commercial scale.
- This will also typically include the need to incorporate additional production wells over the lifetime of the plant.
- Geothermal power plants tend to have higher installed costs, O&M costs and capacity factors than hydropower, some bioenergy plants, solar PV and onshore wind projects.
- In 2024, bioenergy contributed around 1% of the global total of renewable power capacity additions, with 5.1 GW of new bioenergy projects installed.
IRENA’s 2024 report also explores the structural cost drivers and market conditions shaping renewable investment. While continued cost reductions are expected as technologies mature and supply https://www.seomastering.com/audit/ibuildroads.com/ chains strengthen, short-term challenges remain. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Should EIA’s forecast materialize, by the end of 2026, the mix of all renewables, including estimated small-scale solar, would reach 525,356.1 MW, surpassing natural gas at 514,212.5 MW, and this does not include the capacity provided by battery storage. Battery storage accounted for the second-largest share of capacity additions in the first half of the year, at 26% (5.9 GW), about half of which was in Arizona or California. Monitoring, analytics, automation, and predictive maintenance can help operators identify risks earlier, improve energy yield and availability, reduce unplanned downtime, and manage renewable fleets more efficiently.
Based in Raleigh, North Carolina, Pam is committed to supporting the utilities industry with innovative and practical solutions that address the challenges of today and tomorrow. She holds an Industrial Engineering degree from Purdue University and a Master of Business Administration from Rollins College. This month, NERC released the first draft of its 2019 Compliance Monitoring and Enforcement Plan (CMEP) which identifies power delivery system risks and outlines compliance audit requirements for next year. NERC’s 2019 ERO Reliability Risk Priorities Report identified and prioritized the major risks facing the utility industry with a particular focus on security issues.
The proposed revisions address the remaining key recommendations from the FERC–NERC Joint Inquiry Report into Winter Storm Uri and directives arising from a 2023 FERC Order regarding the previously submitted cold weather standards. On November 1, 2024, FERC Commissioners led a technical conference regarding co-locating large loads at generating facilities. Discover how integrating enterprise systems empowers utilities to streamline operations, enhance grid reliability and deliver superior customer service.
Utilities should be prepared to modify their NERC compliance programs as necessary to address the potential introduction of DLR in their businesses. NERC’s plan calls attention to the need for thoughtful integration of IBRs and identifies current and future work required to mitigate reliability risks resulting from the deployment of this technology. NERC report on best practices for utilities that have encountered facility ratings program challenges.
This memo focuses on the larger of those entities, which has greater potential for substantial renewable energy development and an established permitting system. How many utility-scale solar and onshore wind plants are currently in use on public lands? This study researches capacity constraints and congestion on the transmission grid and will help FERC and RTOs determine where future transmission should be planned in order to relieve pressure and meet needs. FERC should encourage RTOs to prioritize regional transmission planning in order to meet decarbonization goals and comply with an influx of cheaper, cleaner energy into its portfolio. HVDC transmission allows for the direct current (DC) transfer of power over long distances, which is more energetically efficient than alternating current (AC). Two types of entities established by FERC, regional transmission organizations (RTOs) and independent system operators (ISOs), help to coordinate regional transmission across utilities.
The exact architecture depends on the generation technology, project size, and grid-connection requirements. These technologies help manage variable generation, maintain grid stability, and meet grid-code and interconnection requirements. As the cost of building utility-scale projects has dropped in recent years, solar PPAs are being agreed upon at ever-lower rates, which has helped make solar energy increasingly attractive to utilities and governments. A major advantage of CSP plants is that they can incorporate energy storage, allowing power generation after dark without the need for expensive batteries. Several of the plan’s critical strategies challenge established utility business models. In America’s 250th Year We Agree on the Knicks, Ranch Dressing, and Building Resilience to the Dangers of Extreme Heat
Hydroelectric Power Generation
Discover why now is the ideal time for utilities to deploy AMI 2.0, unlocking real-time data, operational efficiency and grid modernization benefits. Discover how utilities can overcome common challenges and achieve true IT/OT integration by focusing on vision, alignment, change management, standardization, and scalable strategy. Discover how modern 3D facility mapping empowers utilities to modernize infrastructure, improve asset management, and enable remote workflows with accurate digital twins, delivering https://echoplex.us/the-9-most-unanswered-questions-about/ cost savings and operational efficiency. Explore how global energy market participants can reduce risk and improve forecasting through advanced analytics, integrated data strategies, and real-time insights.
